INSULATED PANELS
XLT Floor are laminated mass timber floor panels. Installed as a solid flooring system, it provides strong thermal and acoustic performance, supporting more stable and comfortable internal environments. Panels are dimensionally accurate, providing a flat, stable substrate suitable for a wide range of floor finishes, including carpet, timber and vinyl. Lightweight and easy to handle, XLT Floor supports efficient installation on site.
XLT Floor panels deliver a thermal rating of 0.5 m²K/W, providing excellent insulation against temperature changes. This helps maintain indoor comfort while reducing the need for heating and cooling.
Made from plantation pine that absorbs carbon from the atmosphere as the tree grows. Trees are regrown creating a cycle of carbon sequestration.
XLT Floor achieves Rw = 34 dB for minimal sound transference. This makes it a great choice for creating quieter, more peaceful living environments.
Made from solid mass timber, XLT Floor offers a sturdy, stable feel underfoot without give or bounce.
XLT Floor employs a weather-resistant membrane and sealing tape to help keep panels dry during installation.
XLT Floor panels are made with strict and tight dimensional accuracy (±2mm), so that floors are flat and ready for coverings.
Each panel weighs approximately 50kg, allowing for easy handling on site and reducing reliance on lifting equipment.
With a 60mm panel depth, XLT Floor facilitates drainage set down so joists can maintain a constant depth.
| Species | Radiata Pine |
| Width | 600mm |
| Length | 2700mm & 3000mm |
| Thickness | 60mm |
| Weight | 47kg & 52kg |
| Joint Group | JD5 |
| Durability | Untreated |
| Bending Strength (f’b) | 12.0 MPa |
| Shear Strength (f’s) | 1.9 MPa |
| Compression perp. to grain (f’p) | 6.0 MPa |
| Modulus of Elasticity | 6000 MPa |
| Density | 480kg/m3 |
| Application | XLT Floor Weight | SDL Finishes + Ceiling | LL Distributed Load | LL Point Load | Max. Joist Spacing |
|---|---|---|---|---|---|
| General Areas – Residential | 0.3kPa | 0.7kPa | 1.5kPa | 1.8kN | 600mm |
| Stairs & Landing Areas – Residential | 0.3kPa | 0.7kPa | 2.0kPa | 2.7kN | 600mm |
| General Areas – Commercial | 0.3kPa | 1.0kPa | 3.0kPa | 4.5kN | 600mm |
Max. joist spacing is based on the application and the requirements of AS1684.2:2021 Section 5.7 and AS/NZS1170.
| XLT Floor | Alpha Floor | Particle Board | |
|---|---|---|---|
| Material | Radiata Pine | Concrete | Pine |
| Thickness | 60mm | 35 mm | 19mm |
| Weight | 30kg/m2 | 35kg/m2 | 16kg/m2 |
| Sound Insulation | 34 Rw + Ctr | 37 Rw + Ctr | 26 Rw + Ctr |
| Thermal Insulation | 0.5 R Value m2K/w | 0.13 R Value m2K/w | N/A |
| Sustainability | Renewable, Fast Growing | High Carbon Footprint | Limited |
| NatHERS Comparison | 6.2 Star | 6.1 Star | 6.0 Star |